Ex-Lynx-Wp-Tx - Hall Technologies LYNX Series Manual

EX-LYNX-WP-TX PANEL
No. Name
1 HDMI IN
2 DC 12V
3 RS-232
4 IR OUT
5 IR IN
6 CAT OUT
7 UPDATE
8 EDID
Hall Technologies December 29, 2022
Description
HDMI input
DC 12V/1A power supply connection for local power
NOTE: Only one side (transmitter or receiver) needs to be powered locally – the EX-
LYNX-RX is typically locally powered and includes the needed power supply.
RS232 port on a phoenix connector for control pass-through
IR emitter port output (received from the EX-LYNX-RX IR input)
IR emitter port input (sent to the EX-LYNX-RX IR output)
RJ45 output port for connection to the RJ45 input port on a cascading EX-LYNX-RX
(up to 8 can be cascaded)
Used to update the firmware.
Sets EDID information (see dipswitch settings in the connections diagram).
Page 9 of 18