Troubleshooting - Hall Technologies LYNX Series Manual

Troubleshooting

Problem Type
Video
Hall Technologies December 29, 2022
Problem Options
Confirm the connectors are properly seated on each device
Confirm at least one side (typically the receiver) has local power
connected
Test the category cable to confirm proper pinout and no shorts in the
cable
No video on display
Confirm the distance between the transmitter and receiver does not
exceed specifications (depending on the desired resolution)
Confirm the HDMI input of the display is correctly selected
Confirm the connected source is sending video to the EX-LYNX-TX (i.e.
verify laptop is in duplicate or extend mode)
Confirm the connectors are properly seated on each device
Confirm each subsequent receiver has local power connected
When cascading, first
Test the category cable to confirm proper pinout and no shorts in the
receiver displays video,
cable
however subsequent
Confirm the distance between each receiver does not exceed
receivers do no
specifications (depending on the desired resolution)
Confirm the input on the display is correctly selected
Page 15 of 18