Subscribe to Our Youtube Channel
Related Manuals for Hall Technologies FXT-460
Summary of Contents for Hall Technologies FXT-460
- Page 1 Hall Technologies • 1234 Lakeshore Dr Suite #150 Coppell, TX 75019 • halltechav.com FXT-460 4K HDMI 2.0 over a single LC Fiber Optic Extender USER MANUAL August 9, 2023 Hall Technologies August 9, 2023 Page 1 of 13...
- Page 2 8. Protect the power cord from being walked on or pinched particularly at plugs. 9. Only use attachments / accessories specified by the manufacturer. Refer all servicing to qualified service personnel. Hall Technologies August 9, 2023 Page 2 of 13...
-
Page 3: Table Of Contents
Overview ............................4-5 Features............................5 Package Contents ............................5 Setup ................................6 Installation ........................... 6-7 Connectors and Indicators .......................... 8 FXT-460-S Front ..........................8 FXT-460-S Back ..........................9 FXT-460-R Front ..........................9 FXT-460-R Back ..........................10 Troubleshooting ............................11 Specifications ............................12... -
Page 4: Introduction
(4:4:4 with HDR), HDCP 2.0, bidirectional RS-232 and EDID management. The FXT-460-S Sender provides a HDMI input with a corresponding HDMI loop output. The audio component of the HDMI input is extracted and available as both analog (L/R) and Digital SPDIF (TOSLINK) on corresponding connectors (see diagram above). -
Page 5: Features
• De-embedded HDMI audio available at both ends (Sender and Receiver) • EDID Emulation with LEARN function. Package Contents FXT-460-S & FXT-460-R 1x Model FXT-460-S 1x 3 position terminal block for RS-232 1x Power Supply 4x Power universal adapter plugs ... -
Page 6: Setup
HDMI OUT connector. *Note: A video source is NOT required to embed audio onto the HDMI output at the FXT-460-R. If no HMDI source signal is present, the HDMI output at the FXT-460-R will be a black screen at 480p resolution. - Page 7 Connect the SPDIF OUT and/or L/R OUT audio outputs to a compatible audio device. (e.g., headphones, assistive listening devices, or Audio Amplifier such as the Hall Technologies AMP-4840 or AMP-7040.) • Connect the included power supplies to the 12V DC connectors on both the FXT-460-S and FXT- 460-R. Hall Technologies...
-
Page 8: Connectors And Indicators
Connectors & Indicators FXT-460-S Front Name Description • ACT: ON means HDMI Input receiving video (active) STATUS LEDs • LINK: ON means fiber optic link to receiver is on • FIBER OUT Connects to fiber optic cable from receiver •... -
Page 9: Fxt-460-S Back
FXT-460-S Back Name Description • 12V DC Connects to the included power supply. EMBED SOURCES • Connect to compatible digital audio source • HDMI OUT Connect to a compatible HDMI SINK • HDMI IN Connect to a compatible HDMI source EXTRACTED AUDIO •... -
Page 10: Fxt-460-R Back
Note: These audio outputs can be either the HDMI INPUT audio or embedded audio from transmitter. EDID Handling With no SINK attached to the FXT-460-R HDMI OUT connector, the EDID presented to the SOURCE will be emulated from the current EDID stored in the system. Hall Technologies... -
Page 11: Troubleshooting
• Try restoring factory defaults using the front panel VIDEO EDID button (hold for 7 seconds). • Cycle the EDID mode with the front panel VIDEO EDID button. Hall Technologies August 9, 2023 Page 11 of 13... -
Page 12: Specifications
Specifications Audio & Video Video Standards DVI (single link) FXT-460-S 1x HDMI Input 1x HDMI Output 1x 3.5 mm L/R Audio Output 1x TOSLINK Audio Output Connectors 1x Fiber Optic Simplex LC Bidirectional SFP+ Transmitter FXT-460-R 1x HDMI Output 1x 3.5 mm L/R Audio Output... - Page 13 © Copyright 2023. Hall Technologies All rights reserved. 1234 Lakeshore Drive, Coppell, TX 75019 halltechav.com / support@halltechav.com +1 (800)-959-6439 Hall Technologies August 9, 2023 Page 13 of 13...
Need help?
Do you have a question about the FXT-460 and is the answer not in the manual?
Questions and answers