Contacting Dell - Dell PowerSwitch S5048F-ON Firmware Update

POST SPD test ............................... PASS
POST Lower DRAM Memory test
.... Perf cnt (curr,fixed): 0x50108FB98,0xA021236C0
POST Lower DRAM Memory test ................. PASS
POST Lower DRAM ECC check ................... PASS
Verify firmware update
After you have updated the firmware, verify that all components—BIOS and CPLD, are running the correct version.
● To check the BIOS version, use the dmidecode -s system-version command in ONIE. The BIOS version also displays
during system bootup.
● To check the CPLD version, use the showSystemInfo command at the DCLI prompt.

Contacting Dell

Dell provides several online and telephone-based support and service options. Availability varies by country or region and
product, and some services may not be available in your area.
To access the Dell support site, go to www.dell.com/support/. To display information in your language, scroll down to the
bottom of the web page and select your country or region from the drop-down menu.
● To obtain product-specific information, enter the 7-character Service Tag or 11-digit express service code of your switch,
which is found on the pull-out tag, also known as a luggage tag, and click Submit.
● To receive more technical support, click Contact Us. On the Contact Information web page, click Technical Support.
● To access product documentation and resources to install, configure and troubleshoot the Dell PowerSwitch, see the
Networking Hardware Platforms and OS9 Info
● To access product documentation and resources to configure and troubleshoot the OS10 Networking operating system, see
the Dell Networking OS10 Info
To search for drivers and downloads, go to the Drivers and Downloads section for your switch at www.dell.com/drivers/.
To participate in Dell community blogs and forums, go to www.dell.com/community.
18
Hub.
Hub.
Dell