Operation; Weighing; Taring - KERN EFS Series Operating Instructions Manual

6 Operation

6.1 Weighing

Start balance by pressing
selftest and then changes to the zero display.
If the weighed material is heavier than the weighing range,
in the display appears (=overlaod)
The balance is switched off by pressing

6.2 Taring

In weighing mode place a tare vessel on the weighing pan
and press . The display goes to „0", the weight of the
vessel is now saved internally. If the weight is heavier than
the zeroing range" (20d), „NET" is displayed.
Place the weighing good and read the measured value.
The bargraph appears according to the placed weight.
If you press again the button
appear again.
The taring process can be repeated any number of times, e.g. when adding several
components for a mixture (adding).
The limit is reached when the whole weighing range is allocated.
After removing the taring container the total weight is displayed as negative display.
12
. The balance carries out a
for a long time.
after finishing the weighing process, „0" will
(example)
EFS-BA-e-2211