Monitoring Of Test Equipment; Basic Safety Precautions; Pay Attention To The Instructions In The Operation Manual; Personnel Training - KERN EFS Series Operating Instructions Manual

2.4 Monitoring of Test Equipment

In the framework of quality assurance the measuring-related properties of the balance
and, if applicable, the testing weight, must be checked regularly. The responsible user
must define a suitable interval as well as type and scope of this test. Information is
available on KERN's home page
balance test equipment and the test weights required for this. In KERN's accredited
DKD calibration laboratory test weights and balances may be calibrated (return to the
national standard) fast and at moderate cost.

3 Basic Safety Precautions

3.1 Pay attention to the instructions in the Operation Manual

 Carefully read this operation manual before setup and
commissioning, even if you are already familiar with KERN balances.

3.2 Personnel training

The appliance may only be operated and maintained by trained staff.

4 Transport and storage

4.1 Testing upon acceptance

When receiving the appliance, please check packaging immediately, and the appliance
itself when unpacking for possible visible damage.

4.2 Packaging / return transport

 Keep all parts of the original packaging for a possibly required
return.
 Only use original packaging for returning.
 Prior to dispatch disconnect all cables and put aside loose/mobile
parts.
 Reattach possibly supplied transport securing devices.
 Secure all parts such as the glass wind screen, the weighing
platform, power unit etc. against shifting and damage.
6
(www.kern-sohn.com with regard to the monitoring of
EFS-BA-e-2211