Table of Contents
EPC-SERIES VERTICAL PLATE CLAMPS
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description
of it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department
can also be contacted online at https://www.vestil.com/page-parts-request.php.
Electronic copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
manuals.php.
Specifications..........................................................................................................
Signal
Words...........................................................................................................
Safety
Instructions.....................................................................................................
National
Standards...................................................................................................
Minimum Uniform Load Weight & Uniform
Exploded View & Bill of
Using the Plate
Clamp............................................................................................... 5, 6, 7,
Record of Satisfactory
Load
Tests.............................................................................................................
Inspections &
Maintenance........................................................................................
Labeling
Diagram......................................................................................................
Limited
Warranty......................................................................................................
Table of Contents
Rev. 3/12/2021
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
USE AND MAINTENANCE MANUAL
Table of Contents
Capacity.........................................................
Materials.................................................................................
Condition.................................................................................
Copyright 2021 Vestil Manufacturing
Vestil Manufacturing Corp.
Fax: (260) 665-1339
www.vestilmfg.com
EPC MANUAL
e-mail:
info@vestil.com
https://www.vestil.com/page-
Page 1 of 11
Page
2
2
3
-
4
4
4
5
8
8
9
9
10
11