Racelogic Performance Box Touch V1 Quick Start Manual page 12

12. The unit is now ready to display live Lap Timing values.
Main Screen:
• Once the start/finish line is crossed, Performance Box Touch will automatically begin to create a reference
lap. When a reference lap is being created, a 'Creating a Reference Lap' message is displayed within the Delta-T
section and the reference lap section will show a rolling lap time. The LEDs will also illuminate
creation process. The reference lap will update if a faster lap is achieved unless the
Fixed within the Settings.
• Once a reference lap is created, the unit presents a live difference in lap time (Delta-T) between the current lap time
and the stored and active reference lap at the current location on the track.
• The 4 LEDs at the top of the screen provide a live reference lap speed comparison (Delta-V), varying in
colour between green
the current location on the track. You can change the settings for this in the
Basic Screen:
• Performance Box Touch will display the current live lap time. When a new lap starts, the previous lap time will be
displayed for 3 seconds before reverting to displaying the current live lap time. You can just display the previous lap
time by Disabling the Rolling Lap
13. You can override the detected start/finish line by manually setting a
14. Performance Box Touch can also start lap timing from a
this is particularly suitable for sprint style events.
15. By default, Performance Box Touch will automatically start recording when detecting a speed of over 0.5 km/h.
You can change this in the
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V1/
Main screen
and red depending on whether you are travelling faster or slower than the reference lap at
Time.
General Settings.
Quick_Start_Guide_%E2%80%93_Performance_Box_Touch_V1/Quick_Start_Guide%3A_Lap_Timing_Mode_-
Basic screen
Delta-V Range
Start/Finish Line
Standing Start if you have set a separate Finish Line,
blue during the
Reference Lap has been
settings.
or just a Finish Line.
_Performance_Box_Touch_V1
12