Connecting The Shielding; Installing The Spring-Loaded Terminal Block In The Enclosure - Siemens SIWAREX JB Compact Operating Instructions
Stainless steel with atex certificate
Hide thumbs
Also See for SIWAREX JB:
- Operating instructions manual (90 pages) ,
- Instruction manual (18 pages) ,
- Operating instructions manual (44 pages)
Table of Contents
Advertisement
Installing and connecting
5.4 Connection
5.4.2
Connecting the shielding
1. Connect the cable shielding in the EMC cable glands so that it covers a broad area.
5.4.3
Installing the spring-loaded terminal block in the enclosure
Figure 5-5
1. Tighten the two screws on the mounting rail by one turn each.
2. Slide the spring-loaded terminal block on one side under the applied screw
3. Insert the spring-loaded terminal block
4. Screw the spring-loaded terminal block firmly into place.
16
Figure 5-4
Connecting the shielding in the EMC cable gland
Mounting the spring-loaded terminal block on the mounting rail
②
.
SIWAREX JB stainless steel with ATEX certificate
Compact Operating Instructions, 06/2010, A5E01257284C-01
①
.
Advertisement
Table of Contents
