Advertisement
Before mounting the rear camera, connect it to the camcorder to check the view from your
chosen mounting location. If the view is acceptable, you can proceed with mounting the rear
camera. Makes sure that the mounting surface of the vehicle has been cleaned very well and
is completely dry.
To use the double-sided tape, simply peel off the white paper one side and press that side
firmly to the top of the metal bracket on the rear camera, like below. Then peel off the white
paper on the other side and press the bracket firmly to the mounting surface.
To use screws, simply place the screws through the holes on the bottom of the metal bracket
and use a Philips head screwdriver to fasten the screws.
To use both double-sided tape and screws, you first need to mount the camera using the
double-sided tape, then place the screws. Before attaching the double-sided tape to the rear
camera, use the tip of a screwdriver or a different pointed object, to pop out the screw holes in
the double-sided tape.
Please note, screws should never be used when mounting the rear camera on glass.
7
Advertisement
