Advertisement
1. In PHOTO mode, press and hold the MENU button to access the menu. Select Photo
by using the UP or DOWN buttons. Press the OK button to enter the Photo
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from VGA 640x480 (Lowest Quality), 1.3 MP 1280x720, 2 MP
1920x1080, 3 MP 2048x1536, 5 MP 2592x1944, 8 MP 3264x2448, 10 MP 3648x2736
and 12 MP 4032x3024 (highest quality).
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.2.3 Photo Burst
This setting allows the camcorder to take 3 consecutive pictures at once.
1. In PHOTO mode, press and hold the MENU button to access the menu. Select Photo
by using the UP or DOWN buttons. Press the OK button to enter the Photo
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off and 3-Photo Burst.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.2.4 Photo Quality
This setting determines the level of compression the camera uses when saving photos to
your memory card. A high level of compression will produce a lower quality photo, and will
also use less space when saving your photos.
1. In PHOTO mode, press and hold the MENU button to access the menu. Select Photo
by using the UP or DOWN buttons. Press the OK button to enter the Photo
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Super Fine (highest quality), Fine, and Normal (lowest quality).
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
20
Advertisement
