Minolta MNCD410T User Manual page 7

Please note, if you do not wish to wire your camera to the reverse lights, the rear camera will
still operate normally but will not automatically activate unless done so manually by cycling
through the camera views.
When mounting the rear camera, the camera should always be mounted with the metal
bracket at the top, like below. If the metal bracket is on the bottom, the image will appear
upside down when viewed on the camcorder.
There are three options you can use to mount the rear camera: (1) With double-sided tape,
(2) with screws, or (3) using both double-sided tape and screws.
6