Advertisement
4.2.5 Photo Sharpness
This setting determines the visible detail of the photos being captured.
1. In PHOTO mode, press and hold the MENU button to access the menu. Select Photo
by using the UP or DOWN buttons. Press the OK button to enter the Photo
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Hard (sharp, saturated photo), Fine (medium sharpness), and
Light (soft, duller photo).
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.2.6 White Balance
This setting determines the color of light present in your photos. It can make scenes seem
1. In PHOTO mode, press and hold the MENU button to access the menu. Select White
by using the UP or DOWN buttons. Press the OK button to enter the White
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Auto, Daylight, Cloudy, Tungsten, and Fluorescent.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.2.7 Color Effect
This setting determines the filter color effect of the photo.
1. In PHOTO mode, press and hold the MENU button to access the menu. Select Color
Effect by using the UP or DOWN buttons. Press the OK button to enter the Color
Effect submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Normal, Black and White, and Sepia.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
21
Advertisement
