Advertisement
4.1.9 Watermark
This setting allows you to imprint a custom watermark, like your vehicle license plate number,
onto your recorded video files. Once a video file is recorded with the imprint, the imprint
cannot be removed.
1. In VIDEO mode, press and hold the MENU button to access the menu. Select
Watermark by using the UP or DOWN buttons. Press the OK button to enter the
Watermark submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. When ON is selected, a new screen will show allowing you to set the watermark value.
4. Press the UP or DOWN buttons to change the highlighted value. Press the OK button
to change the highlighted value.
5. Press the MENU button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.1.10 Motion Detection
This setting automatically begins recording if movement is detected in front of the camcorder
lens. Once recording, the camcorder will stop recording if not further movement is detected
within a 10-second period of the last movement registered. You may also manually stop
recording anytime by pressing the OK button during a recording.
1. In VIDEO mode, press and hold the MENU button to access the menu. Select Motion
by using the UP or DOWN buttons. Press the OK button to enter the Motion
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
Note: When selecting OFF, your camcorder will still automatically record upon startup if
you power it off.
18
Advertisement
