Advertisement
4.2.8 ISO
This setting determines the light sensitivity in the photos being captured.
1. In PHOTO mode, press and hold the MENU button to access the menu. Select
using the UP or DOWN buttons. Press the OK button to enter the
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Auto, 100, 200 and 400.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.2.9 Exposure
This function adjusts the frame brightness in your photograph.
1. In PHOTO mode, press and hold the MENU button to access the menu. Select
Exposure by using the UP or DOWN buttons. Press the OK button to enter the
Exposure submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from +3, +2, +1, 0, -1, -2 and -3.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.2.10 Image Stabilization
This setting enables image capture in shaky or low-light settings by electronically eliminating
motion blur and canceling shake.
1. In PHOTO mode, press and hold the MENU button to access the menu. Select Image
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
by using the UP or DOWN buttons. Press the OK button to enter the
submenu.
by
submenu.
22
Advertisement
