Care And Maintenance - Titan TTB926STM Instructions Manual

TTB926STM by TITAN
Power cord
If the power cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a safety hazard.
UK plug
UK plug
If you need to replace the fitted plug, then follow the instructions below.
If you need to replace the fitted plug, then follow the instructions below.
IMPORTANT: The wires in the mains lead are coloured in accordance with the
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
following code:
Blue – Neutral
Blue – Neutral
Brown – Live
Brown – Live
Green/Yellow - Earth
Green/Yellow - Earth
As the colours of the wire in the mains lead of this product may not correspond
As the colours of the wire in the mains lead of this product may not correspond
with the coloured marking identifying the terminals in your plug, proceed as
with the coloured marking identifying the terminals in your plug, proceed as
follows. The wire, which is coloured blue, must be connected to the terminal,
follows. The wire, which is coloured blue, must be connected to the terminal,
which is marked with N or coloured black. The wire, which is coloured brown,
which is marked with N or coloured black. The wire, which is coloured brown,
must be connected to the terminal, which is marked L or coloured red. The wire,
must be connected to the terminal, which is marked L or coloured red. The wire,
which is colored green/yellow,must be connected to the terminal, which is mark
which is colored green/yellow,must be connected to the terminal, which is mark E
E or .
or .
WARNING! Never connect live or neutral wires to the earth terminal of
WARNING! Never connect live or neutral wires to the earth terminal of
the plug, which is marked with E.
the plug, which is marked with E.
Connect green/yellow wire
to E (Protective earth)
Connect Blue to N
firmly clamped
Only fit an approved BS 1363 or BS 1363/A plug and correctly rated BS 1362 13
Only fit an approved BS 1363 or BS 1363/A plug and correctly rated BS 1362 13
Amp fuse. If in doubt, consult a qualified electrician.
Amp fuse. If in doubt, consult a qualified electrician.
NOTE: If a moulded plug is fitted and has to be removed take great
NOTE: If a moulded plug is fitted and has to be removed take great
care in disposing of the plug and severed cable, it must be destroyed
care in disposing of the plug and severed cable, it must be destroyed
to prevent engaging into a socket.
to prevent engaging into a socket.
MNL_TTB926STM_2200W Wallpaper Stripper_GB_V8_220623.indd 21 MNL_TTB926STM_2200W Wallpaper Stripper_GB_V8_220623.indd 21
(Neutral)
Outer sleeve

Care and maintenance

.
13 AMP fuse approved
to BS 1362
Brown L (Live)
Cable grip
2022/6/23 下午5:04 2022/6/23 下午5:04
EN EN
21