Introduction - Cooper Kyle Form 4C Programming Manual

SAFETY
FOR LIFE
CAUTION: Equipment misoperation. Do not
connect this control to an energized recloser
until all control settings have been properly pro-
grammed and verified. Refer to the programming
information for this control. Failure to comply can
result in control and recloser misoperation, equipment
damage, and personal injury.
This guide is designed to assist engineers and qualified
technicians with programming of the Form 4C control.
These individuals must be familiar with the functions and
programming parameters required for specific recloser
installations.

INTRODUCTION

This guide contains a listing of all access codes, pro-
gram settings, and detailed operating descriptions of the
code parameters. The codes, settings, and parameter
descriptions are also listed on the control information
label located inside the cabinet door.
CAUTION: Recloser misoperation. The con-
G110.3
trol must be removed from service prior to per-
forming any maintenance, testing, or programming
changes. Failure to comply can result in misoperation
(unintentional operation) of the recloser.
S280-77-4
T216.2
3