Table of Contents
Advertisement
Kyle Form 4C Microprocessor-Based Recloser Control Programming Guide
ACCESSORY ACCESS CODES AND PARAMETERS
Table 3 is a list of the access codes for the firmware
accessories available for the Form 4C control. A detailed
list of program settings, parameter descriptions, and
keyboard access codes appears in the Access Code
Description section of this manual. Access codes and
parameter descriptions can also be found on the control
information label located inside the cabinet door.
The Form 4C control has numerous firmware acces-
sories available to provide the user with new alterna-
tives for improving the performance of the distribution
system.
The firmware accessories include not only new function-
al firmware, but also additional hardware and operation
with KSPS2 Interface software Version 4.0. Each
firmware accessory includes local operation via a toggle
switch, LED indication of the status, and an LED test
pushbutton. Access codes interrogated via the front
panel keypad are also available for status.
TABLE 2
CPU Firmware Accessories
Firmware Accessory
Hot Line Tag
Trip On TCC2
Sensitive Ground/Earth Fault ON/OFF
Switch Mode
TABLE 3
Form 4C Control Accessory Access Codes
ACCESS
CODE
STATUS CODES
63
Hot Line Tag (HLT) Status
64
Switch Mode Status
68
Trip on TCC2 Status
125
Sensitive Ground/Earth Fault Status
16
PARAMETER
The firmware accessories include the Optional Universal
I/O board as part of the design for access to the CPU,
control points, and status points. Each status point is
available via a single-pole, double-throw contact.
Serial communications are also included for all the avail-
able firmware accessories and documented in Refer-
ence Information R280-90-11 Communications Point
Data Base for Digital Communications Protocol Data
2179.
The CPU firmware (Access Code 72) varies based upon
the functionality required. Table 2 lists the values for
Protocol 2179.
CPU Firmware (Access Code 72) Protocol 2179
8.15
9.15
10.15
ACCESS
CODE
SWITCH MODE
190
TCC Selection
191
Minimum Target Sensing
192
Alternate Minimum Target Sensing
11.15
12.15
13.15
PARAMETER
Advertisement
Table of Contents
