Ariston HS C 24 FF NG Installation And Servicing page 46

OVERVIEW
THE INSTALLATION AND FIRST
IGNITION OF THE BOILER MUST
BE PERFORMED BY QUALIFIED
PERSONNEL IN COMPLIANCE WITH
CURRENT NATIONAL REGULATIONS
REGARDING INSTALLATION,
AND IN CONFORMITY WITH ANY
REQUIREMENTS ESTABLISHED BY
LOCAL AUTHORITIES AND PUBLIC
HEALTH ORGANISATIONS.
Advice for the installer
This appliance is designed to produce hot water for domestic
use.
It should be connected to a heating system and a distribution
network for domestic hot water, both of which must be compatible
with its performance and power levels.
The use of the appliance for purposes other than those
specified is strictly forbidden. The manufacturer cannot be held
responsible for any damage caused by improper, incorrect and
unreasonable use of the appliance or by the failure to comply
with the instructions given in this manual.
Installation, maintenance and all other interventions must be
carried out in full conformity with the governing legal regulations
and the instructions provided by the manufacturer. Incorrect
installation can harm persons, animals and possessions; the
manufacturing company shall not be held responsible for any
damage caused as a result. The boiler is delivered in a carton.
Once you have removed all the packaging, make sure the
appliance is intact and that no parts are missing. If this is not the
case, please contact your supplier.
Keep all packaging material (clips, plastic bags, polystyrene foam,
etc.) out of reach of children as it may present a potential hazard.
In the event of a fault and/or malfunction, turn the appliance off,
turn off the gas cock and do not attempt to repair it yourself.
Contact a qualified professional instead.
Before any maintenance or repair work is performed on the
boiler, make sure you have disconnected it from the electricity
supply by switching the external bipolar switch to the "OFF"
position and removing the fuse.
All repairs, which should only be performed using original spare
parts, should be carried out by a qualified professional. Failure
to comply with the above instructions could compromise the
safety of the appliance and invalidate all liability on the part of
the manufacturer.
In the event of any maintenance or other structural work in the
immediate vicinity of the ducts or flue gas exhaust devices and
their accessories, switch the appliance off by switching the
external bipolar switch to the "OFF" position and shutting off the
gas control valve. When the work has been completed, ask a
qualified technician to check the efficiency of the ducting and
the devices.
Turn the boiler off and turn the external switch "OFF" to clean the
exterior parts of the appliance.
Clean using a cloth dampened with soapy water. Do not use
aggressive detergents, insecticides or toxic products. If the
appliance is used in full compliance with current legislation, it
will operate in a safe, environmentally-friendly and cost-efficient
manner.
If using kits or optional extras, make sure they are authentic.
46 /