- User's Quick Guide; Switching The Unit On/Off; Switch-On From The Keypad; Switch-On From Digital Input - MTA TAEevo Tech MINI Operating And Maintenance Manual

OPERATING AND MAINTENANCE MANUAL
1

- User's quick guide

EN
0 . 1 S w i t c h i n g t h e u n i t o n / o f f
The unit is switched on and off:
• from the keypad
• from the digital input (remote ON/OFF)
NOTE
In the event of a power supply blackout, when the power is restored the unit will restart operation in its pre-blackout status.
0 . 1 . 1 S w i t c h - o n f r o m t h e k e y p a d
Power up the unit.
With the unit in standby (OFF) mode press the
If the unit is in standby mode, the display shows
0 . 1 . 2 S w i t c h - o n f r o m d i g i t a l i n p u t
NOTE
Refer to the wiring diagram for connection of the digital input.
Power up the unit by closing the digital input contact; the unit switches on; it switches to standby (OFF) if it is opened.
The off command (from keypad or digital input) always overrides the on command. If the unit is switched off from the
keypad, it must be switched back on from the keypad.
When the unit is switched off using the digital input, the display shows
0 . 2 S e t p o i n t
0 . 2 . 1 D i s p l a y i n g t h e s e t p o i n t
Press the key to display the setpoint.
0 . 2 . 2 M o d i f y i n g t h e s e t p o i n t
Hold down the
Use the and
Press the key to confirm or wait for the time-out.
The data in this manual are not binding and they can be modified by the manufacturer without notice. Reproduction of this manual is strictly prohibited
U
S E R
key for 3 seconds to activate modification.
keys to edit the value.
'
S Q U I C K G U I D E
key. If the unit is on, the display shows the regulator probe value.
.
.
.
TAEevo Tech MINI 02÷10