Brief Guide To The Function Matrix - Endress+Hauser Proline Promag 10 Operating Instructions Manual

Operation
!
46
5.2

Brief guide to the function matrix

Note!
• Please refer to the general notes on → Page 47.
• Function matrix overview → Page 85
• Detailed description of all functions → Page 86 ff.
The function matrix is a two-level construct: the function groups form one level and the groups'
functions the other.
The groups are the highest-level grouping of the control options for the measuring device. A number
of functions is assigned to each group. You select a group in order to access the individual functions
for operating and configuring the measuring device.
HOME position → F → Enter the function matrix
1.
2. Select a function group (e.g. OPERATION)
3. Select a function (e.g. LANGUAGE)
Change parameter / enter numerical values:
P → Select or enter enable code, parameters, numerical values
F → Save your entries
4. Exit the function matrix:
– Press and hold down the Esc key (X) for more than 3 seconds → HOME position
– Repeatedly press Esc key (X) → Return step by step to HOME position
Esc
+
-
m
n
Fig. 37: Selecting and configuring functions (function matrix)
E
p
Esc
–
+
E
o
E E
Esc
– +
+
–
E
E
E
E
Proline Promag 10
> 3 s
Esc
–
+
E E E
Endress+Hauser
F06-x0xxxxxx-19-xx-xx-xx-000