Download Print this page

Installation Instructions For Built-In - GASLAND chef GH12SF Instruction Manual

Built-in gas cooktop

Advertisement

Available languages

Available languages

05
To turn the two central burners 90°, proceed as follows:
● Make sure that the burners are cool;
● Lift the burner completely out of its housing;
● Replace it in its housing in the position desired;
● Make sure that the burners are positioned correctly before use.
In addition, the two central burners can be used in tandem or separately with
cookware of different.
For best performance, keep in mind the following:
● All types of casseroles can be used on the ceramic glass cooking surface.
However, it is important that the bottom be perfectly flat. Casseroles with
thicker bottom distribute heat more evenly.
The cookware bottom diameter at least as large as the cooking area so that all of
the heat produced by the heating element is used.
● Make sure that the bottom of the pot is always dry and clean to insure good
contact between the cookware and the cooking surface. This also extend the
life of pots and ceramic glass surface as well.
● Do not use the same cookware which for gas burners because the concentrat
ed heat they produce can deform the bottom of the pot. Therefore, you will not
achieve best results when using these pots on the ceramic glass surface.

Installation Instructions For Built-in

The following instructions are directed at the qualified installer, so the installation
and maintenance procedures may be followed in the most professional and
expert manner.
Important: Unplug the electrical connection before performing any maintenance
or regular upkeep work.
8350 Patriot Blvd STE B, N. Charleston, SC 29418
www.gaslandchef.com
www.gaslandchef.com
(844) 538-7890
support@gaslandchef.com

Advertisement

loading

This manual is also suitable for:

Gh30bfGh30sfGh60bfGh60sfGh90bfGh90sf