GASLAND chef GH12SF Instruction Manual page 14

www.gaslandchef.com
13
-Burner ON, -Burner ON, -Burner OFF
large flame small flame(saving mode)
Fig. 8
See fig.8 for various operating options(flame size selection). The burner should
be set at a large flame during the initial phase of cooking, it make food boil
quickly. Then should turn knob to the saving flame position to maintain the
cooking. It is possible to adjust the flame size stepless.
It is prohibited to adjust the flame between the burner off and burner
on large flame positions.
High quantity of energy can be conserved if the cooktop is used correctly, param-
eters are designed correctly, and appropriate cookware is used. The energy
conservation be as follows：
● Up to 60% are conserved when proper pots are used,
● Up to 60% are conserved when the unit is operated correctly and the suitable
flame size is chosen.
It is a prerequisite for efficient and energy-saving operation of cooktop that the
burners are kept clean at all times(in particular the flame slots and nozzles).
Pressure regulator adjustment
Please do remember that pressure regulator adjustment should be done by a
qualified technician.
Remove the cap of gas regulator, adjust the spring(see fig.9) to convert the gas to
be LPG; and convert gas type to be NG by inverting the spring and install it(see
fig.10).
Fig. 9 LPG Fig.10 NG
8350 Patriot Blvd STE B, N. Charleston, SC 29418 (844) 538-7890 support@gaslandchef.com
www.gaslandchef.com