Connection - NEC IE-789835-NS-EM1 User Manual

3.1 Connection

(1) Connection with IE-78K0S-NS or IE-78K0S-NS-A main unit
See the IE-78K0S-NS User's Manual (U13549E)
to the IE-78K0S-NS.
Note When using the IE-78K0S-NS-A, refer to the IE-78K0S-NS-A User's Manual (U15207E).
(2) Connection with emulation probe
Connect an emulation probe and supplied FG cable to the IE-789835-NS-EM1 as follows.
On this board, connect the emulation probe to CN1.
Caution Incorrect connection may damage the IE system.
Be sure to read the emulation probe's user's manual for a detailed description of the
connection method.
<Steps>
<1> Remove two plates on the side of the IE-78K0S-NS or IE-78K0S-NS-A frame. Loosen one FG screw on the
lower side of the connector on the IE system side of the emulation probe, align one end of the FG cable and
fix it by securing the FG screw.
CN1
Main board of
IE-78K0S-NS
(sold separately) or
IE-78K0S-NS-A
(sold separately)
CHAPTER 3 INSTALLATION
Note
for a description of how to connect the IE-789835-NS-EM1
Figure 3-1. Connection of Emulation Probe (1)
Emulation probe
SWEX-144SD-1
(sold separately)
User's Manual U16290EJ1V0UM
FG cable (supplied)
Emulation board
IE-789835-NS-EM1
Plate on side of
frame
19