Table of Contents
Advertisement
User Guide | Monitoring unit, type PR-OCTO
7. Prosa mandatory settings
8. Technical specification
9. Dimensions
8 | BC391624209008en-000201
Fig. 8: Association between OCTO device and the specific cooler.
This section is to highlight the fundamental importance of the STEP 7 listed in Section 6.
The association between the equipment and the PR-OCTO can be done:
•
Using the mobile app
•
With the Alsense Portal
• or other modalities previously agreed with Danfoss (contact via e-mail: support.prosa@danfoss.com).
The association must be done before to ship the equipment to the final customer. Any shipment
to the final customer must be notified with an e-mail containing the equipment codes and the
customer's warehouse address to support.prosa@danfoss.com.
The techincal specification can be found on the following datasheets:
•
PR-OCTO
•
PR-OCTO Lean
Fig. 9: Left and right view
143
+0.25
© Danfoss | Climate Solutions | 2022.04
Advertisement
Table of Contents
Need help?
Do you have a question about the PR-OCTO and is the answer not in the manual?
Questions and answers