NEC 78K0S/K 1+ Series Application Note page 21

<4> TOC00
0 0 0 0
<5> TMC00
0 0 0 0
<6> Px, PMx, PMCx
78K0S/KA1+ and 78K0S/KB1+ microcontrollers
78K0S/KY1+ and 78K0S/KU1+ microcontrollers
CHAPTER 4 SETTING METHODS
0 1 1 1
1 1 x 0
1 1
1 1
Px Register
P31 = 0
P21 = 0
Application Note U18887EJ1V0AN
Timer output control
1 Enables output.
Timer F/F control upon match between CR000 and TM00
1 Enables inversion operation.
Timer output F/F status setting
0 1 Resets (0) timer output F/F.
Timer F/F control upon match between CR010 and TM00
0 Disables inversion operation.
One-shot pulse output operation control
0 Successive pulse output mode
One-shot pulse output trigger control by software
0 Without one-shot pulse output trigger
Overflow detection of 16-bit timer counter 00 (TM00)
0 Overflow not detected.
Operation TO00 inversion
mode and clear timing selection
mode selection
0 Clear & start Match between
occurs upon TM00 and
match between CR000 or
TM00 and match between
CR000 TM00 and
CR010
1 Match between
TM00 and
CR000, match
between TM00
and CR010, or
valid edge of
TI000 pin
PMx Register
PM31 = 0
PM21 = 0
Interrupt
request
generation
<When used as
compare
register>
Generated
upon match
between TM00
and CR000, or
match between
TM00 and
CR010
<When used as
capture
register>
Generated at
valid edge of
TI000 pin or
TI010 pin
PMCx Register
Setting not required
PMC21 = 0
21