Table of Contents
Advertisement
Description
WARNING
Invacare products are specifically designed and manufactured
for use in conjunction with Invacare accessories. Accessories
designed by other manufacturers have not been tested by
Invacare and are not recommended for use with Invacare
products.
The introduction of certain third party products between
the cushion surface and the user may reduce or impede the
clinical effectiveness of this product.
'Third party products' may include, but are not limited to
items including under blankets, plastic sheets and sheepskins,
etc.
WARNING
Any object between the user and the pressure reducing sur-
face may result in the development of pressure ulcers.
▸ Make sure that the support surface in contact with the user
is kept free from crumbs and other food debris.
▸ Drip cables, stents and other foreign objects must not
become entrapped between the user and the pressure
reducing surface of the cushion.
!
IMPORTANT
The information contained in this document is subject to
change without notice.
▸ Check all parts for shipping damage and test before using.
▸ In case of damage, do not use.
▸ Contact Invacare/Carrier for further instructions.
2.2 Symbols on the product
Do not pierce
or cut
Do not put
near flame
Do not bleach
Orientation
Label
Do not iron
3
Description
3.1 Product description
The Invacare Flo-tech Contour Visco cushion is moulded from visco-
elastic (memory) foam, which is temperature-sensitive to the body.
This foam provides a better pressure distribution for the user's body
area in contact with the cushion.
The cover is multi stretch, waterresistant and vapour-permeable.
The cover features an anti-slip base and carry handle.
Invacare Flotech® Contour Visco
Do not tumble
dry
Machine wash
temperature
80°
80 °C
(wipedown)
Tumble dry
Ingress resistant
cover only
Do not dry clean
Do not smoke
5
Advertisement
Table of Contents
