Introduction; Specifications - Microsensor MFE600H Series Operation Manual

Thank you very much for choosing our products. In order to better use the product, it is recommended
that you read the instructions carefully before using the product.

1 Introduction

MFE600H Series Energy Electromagnetic Flowmeter is designed and manufactured with the most
advanced domestic and abroad technology, featuring high accuracy, reliability, good stability and long
service life. We pay our attention to every detail in the process of the product structure design, material
selection, manufacturing, assembly and factory testing etc. With a water tower up to 37m as pressure
stabilizer for actual flow calibration, we have a professional production line for electromagnetic
flowmeter, also we design and develop a series of software and hardware for energy electromagnetic
flowmeter for mass production to ensure high quality in long term use.
It can be widely used in heating, air-conditioning and other heat measurement in civil residential districts,
office buildings and enterprises and institutions.
2

Specifications

Diameter
level of accuracy
Electrode type
Structure type
Electrode material
Lining material
Measured pipe
Nominal pressure
flange/body flange
converter housing
Power supply
Output signal
Electrical connection
IP protection
Display function
Display Data
Maximum flow reading (m³ )
Maximum heat quantity
Heat flow unit
Temperature Sensor
Installation method
Temperature measurement range
Table 1
Flange type DN25～DN400
level 2
Standard fixed electrode, antifouling electrode
Integrated type, separated type (cable length of separated type≤100m)
316L, Ti, HB/HC, Ta, WC, Pt
Neoprene（CR）、 Polytetrafluoroethylene（PTFE）、F46
Stainless steel
0.6MPa、1.0MPa、1.6MPa、2.5MPa、4.0MPa
Carbon steel (standard), stainless steel (optional)
Aluminum die-casting
100 V AC～240V AC
12V DC、24V DC
4mA~20mA DC (load resistance 0Ω~750Ω, active output)
Frequency, pulse output (Passive, active output optional)
Upper and lower limit alarm output (rated value 30V DC, 100mA)
RS485(Modbus protocol), RS232
Profibus-DP、Profibus-PA
M20×1.5
IP65
English
Instantaneous
accumulated flow, flow rate
99999999999
reading （MWH） 99999999999
MJ/h、GJ/h、kWh/h、MW/h
PT1000
Plug-in installation
-50℃～200℃
heat, instantaneous
2
flow, accumulated heat,