Transportation And Storage; Technical Data 535Fbx - Husqvarna 535FBX Operator's Manual

The engine starts but stops again
Check
Fuel tank
Air filter

Transportation and storage

• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel and chain oil tanks before
transportation or before long-term storage. Discard
the fuel and chain oil at an applicable disposal
location.
• Use the transportation guard on the product to
prevent injuries or damage to the product. A saw
chain that does not move can also cause serious
injuries.
• Remove the spark plug cap from the spark plug.
• Attach the product safely during transportation.
To prepare your product for long-term
storage
1. Stop the product and let it become cool before you
disassemble it.
Technical data
Engine
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Recommended max. speed, rpm
Idle speed, rpm
Max. engine output, according to ISO 8893, kW/rpm
Catalytic converter muffler
28
Possible cause
Incorrect fuel type.
The air filter is clogged.
Transportation and storage

Technical data 535FBX

3
Procedure
Empty the fuel tank and fill it with correct fuel.
Clean the air filter.
2. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION:
guide bar are not cleaned, they can
become rigid or blocked.
3. Attach the transportation guard.
4. Clean the product. Refer to
page 18 for instructions.
5. Do a complete servicing of the product.
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as oil or fuel, at a service
center or at an applicable disposal location.
• When the product is no longer in use, send it to
a Husqvarna dealer or discard it at a recycling
location.
34.6
38.0
30.5
11700
2900
1.6/8400
Yes
If the saw chain and
Maintenance 535RBX on
1301 - 006 - 31.10.2022