Introduction Ta1100 - Husqvarna 535FBX Operator's Manual

Symbols on the product
WARNING! This product is dangerous.
Injury or death can occur to the operator
or bystanders if the product is not used
carefully and correctly. To prevent injury
to the operator or bystanders, read
and obey all safety instructions in the
operator's manual.
Read the operator's manual carefully
and make sure that you understand the
instructions before use.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Maximum speed of the output shaft.
The product agrees with the applicable
EC directives.
This product conforms to the applicable
UK regulations.
The product can cause objects to eject,
which can cause injury.
34

Introduction TA1100

Note:
certification requirements for other commercial areas.
Keep a minimum of 15 m distance to
persons and animals during operation of
the product.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Only use flexible cutting wire. Do not use
metal cutting attachments.
Noise emission to the environment label
as per EU (also including New South
Wales legislation) and UK directives and
regulations. The guaranteed sound power
level of the product is specified in and on
the label.
Other symbols/decals on the product refer to
1301 - 006 - 31.10.2022