Advertisement
Quick Links
Advertisement
Related Manuals for Zehnder Pumpen Drain Inox 50 MA
Summary of Contents for Zehnder Pumpen Drain Inox 50 MA
- Page 1 Drain Inox 50 MA Drain Inox 50 MA GB Operating Instructions...
-
Page 2: Table Of Contents
5. Service / Maintenance 6. Warranty 7. Disposal 8. Technical Modification 9. Fault, possible reason and recovery EU-Declaration of Conformity Manufacturer ZEHNDER Pumpen GmbH Zwönitzer Straße 19 08344 Grünhain-Beierfeld, Product name: submersible motor pump Drain Inox 50 Type designation: Technical specifications:... -
Page 3: General
Instruction last modified: 09/2020 1.2 Queries and Ordering For queries and orders please contact your authorised retail trader. 1.3 Technical data Drain Inox 50 MA Typ: 450 W Input power P Voltage / frequency 230 V / 50 Hz... -
Page 4: Areas Of Application
1.4 Areas of application The Drain Inox 50 MA pumps are suitable for the extraction of slightly polluted water with suspended particles (no stones) from private households, industry and agriculture. The size of the suspended matter shall not exceed the maximum grain size referred to in point 1.3. -
Page 5: Safety Information For Maintenance, Inspection And Fitting
3. Description - The pumps Drain Inox 50 MA are fitted with a robust single– phase electric motor. - The most important seal is a mechanical seal between motor and pump– body and also a rotating mechanical seal. -
Page 6: Service / Maintenance
. Maintenance / Service Always disconnect from power before servicing! Service and repair at electrical parts of the pump (cable, motor) has to be done by authorised service- companies or producer. In case of very low temperatures and in any case before the first frost the pump must be removed from water. Empty the pump and store it in a place where it is protected from frost. - Page 7 ______________________________________________________________________________________________________ ...