Related Manuals for Zehnder Pumpen ZM 280
Summary of Contents for Zehnder Pumpen ZM 280
- Page 1 Submersible pump ZM 280 ZM 280 A Betrieb- ZM 650 ZM 650 A sanleitung Operation manual...
-
Page 2: Table Of Contents
Maintenance........................7 Technical modifications ....................8 Warranty .......................... 8 Spare parts list and sectional drawing ZM 280 / ZM 280 A ..........9 Spare parts list and sectional drawing ZM 650 A ............10 OP: ZM English State: 12/05/2008... -
Page 3: Declaration Of Conformity
- According to EC low voltage directive 93/68/EEC, Appendix I - According to EMC directive 92/31/EEC and 93/68/EEC - According to Machinery directive 2006/42/EC ----------------------------------------------------------------------------------------------------------------- We, the ZEHNDER Pumpen GmbH Zwönitzer Straße 19 08344 Grünhain - Beierfeld, herewith declare that the submersible pumps of the type series ZM... -
Page 4: General
08344 Grünhain-Beierfeld Date of manufacture: The date of manufacture of the pump is engraved on the top of the housing. Manufactured sizes: ZM 280 / ZM 280 A ZM 650 / ZM 650 A State of the operation manual: April 2009 1.2 Enquiries and orders... -
Page 5: Range Of Application
1.4 Range of application The pumps ZM are adapted for slightly polluted liquids with suspended solids (no stones) up to a particle size of 10 mm, but not for excrement containing sewage! 1.5 Accessories The pumps are delivered with a hose connection piece with a nut connector for a 1” hose (diameter 25 mm). 2. -
Page 6: Safety-Conscious Way Of Working
- Failure of important functions of the pump - Failure of the prescribed methods for maintenance and repair - Endangerment of persons through electrical, mechanical and chemical influences - Endangerment of the environment through leakage of hazardous substances 2.4 Safety-conscious way of working The safety notes listed in this operation manual, the existent national regulations on accident prevention as well as possible internal working, operating, and safety instructions of the operator must be observed. -
Page 7: Description
3.0 Description The pumps are equipped with a sturdy alternating current motor; the sealing of the pump housing to the motor is executed using two radial shaft sealing rings and/or a mechanical seal. The current is connected using the 10 m long connecting cable with 230 V-50 Hz alternating current. -
Page 8: Technical Modifications
6.0 Technical modifications ..reserved for the purpose of further development. 7.0 Warranty As manufacturer, for all pumps we provide a warranty of 24 months from date of purchase. Your sales receipt passes for verification. During that warranty period, we gratuitously remedy all deficiencies which are attributed to material or fabrication defects by either repairing or replacing the pump (to our choice). -
Page 9: Spare Parts List And Sectional Drawing Zm 280 / Zm 280 A
8.0 Spare parts list and sectional drawing ZM 280 / ZM 280 A Drawing Article no. Qty. Designation Article no. Qty. Designation wing 207083 Motor unit complete 900117 Running wheel 200.008 Motor housing 900131 Bottom filter 200.009 Sleeve for motor housing... -
Page 10: Spare Parts List And Sectional Drawing Zm 650 A
9.0 Spare parts list and sectional drawing ZM 650 A Draw- Article no. Qty. Designation Article no. Qty. Designation ing no. wing Motor unit complete 160* 117710 Sleeve for motor hous- 900100 Sealing ring D=9 150.003 O-ring 900101 Sealing ring D=7 900105 Ball bearing 608 900104...