Chapter10 Parallel Subsystem; Parallel:role <Role; Parallel:number <Number - ITech IT7900 Series Programming Manual

PARallel:ROLE <role>
This command sets and queries the power supply to single, slave or master mode
in the parallel operation.
Syntax
PARallel:ROLE <role>
Argument
<CPD>
SINGle|SLAVe|MASTer
Query syntax
PARallel:ROLE?
Returns
SINGle|SLAVe|MASTer
*RST
SINGle
Example
PAR:ROLE SLAV
PAR:ROLE?
PARallel:NUMBer <number>
This command sets and queries the total instrument number in the parallel
operation, and the setting range is 2-16.
Syntax
PARallel:NUMBer <number>
Argument
<NR1>
Query syntax
PARallel:NUMBer?
Returns
<NR1>
Chapter10
//Set the machine to slave mode.
Copyright © ITECH Electronic Co., Ltd.
PARallel Subsystem
//Query the parallel role of the present instrument.
PARallel Subsystem
79