Related Manuals for Idis DC-T6223HRL-A
Summary of Contents for Idis DC-T6223HRL-A
- Page 1 DC-T Series Installation Manual DC-T6223HRL DC-T6224HRXL DC-T6223HRL-A DC-T6224HRXL-A Powered by...
- Page 2 Before reading this manual This is a basic installation manual for use of an IDIS network camera. Users who are using this product for the first time, as well as users with experience using comparable products, must read this manual carefully before use and heed to the warnings and precautions contained herein while using the product.
- Page 3 Before reading this manual Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1.
- Page 4 IDIS Co., Ltd. reserves all rights concerning this manual. Use or duplication of this manual in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this manual are subject to change without prior notice for reasons such as functionality enhancements.
-
Page 5: Table Of Contents
Table of Contents Part 1 – Introduction ......... 6 Product Features . -
Page 6: Part 1 - Introduction
DC-T6223HRL/DC-T6224HRXL/DC-T6223HRL-A/ DC-T6224HRXL-A is an IP-based network camera that compresses and transmits video over ethernet. You can use the IDIS Discovery program to change network camera settings or the IDIS Solution Suite Compact program to manage multiple network cameras. In this manual, the term Remote System refers to the computer on which the remote program (IDIS Solution Suite Compact or IDIS Web) is running. -
Page 7: Accessories
Part 1 – Introduction Accessories Upon purchasing the product, check inside the box to make sure all the following accessories are included. External appearances and colors of the accessories may vary depending on the model. Network Camera Screws (6ea) Sunshield Desiccant, double-sided tape Quick Guide... -
Page 8: Overview
Part 1 – Introduction Overview Inside Product color and design may vary depending on the model. Outside Lens Camera Body Control Board IR LED Sunshield Fastening Clasp • IR LED Power Activates the IR LED during low-lighting conditions Power Connection Terminal or night. -
Page 9: Back
You can configure, manage, and upgrade this camera and monitor its images from a remote SD Memory Card Slot computer over the network. For more information on network connection setup, refer to the IDIS ABF(Auto Back Focus) Discovery operation manual. Factory Reset Switch •... - Page 10 • Power on or using the IDIS Discovery program from a remote - DC12V -/+: Connect the two wires of the power location. A factory reset will reboot the system. For more information on factory reset, refer to the IDIS Discovery adapter to these ports.
-
Page 11: Installation
Part 1 – Introduction Installation Install the camera in a shaded area. If the camera is installed in direct sunlight, it may be affected adversely. Installation Attach the double-sided tape to the desiccant first, and attach it to the specified position inside the dome cover as shown below. -
Page 12: Dimensions
Part 1 – Introduction Rotate the lens' iris ring and then adjust accordingly. Dimensions... -
Page 13: Part 2 - Camera Connection
Part 2 - Camera Connection Network Camera Network Remote Monitoring... -
Page 14: Part 3 - Appendix
ID and password as a safety precaution. camera. Unable to launch IDIS Web. If the IDIS Web login screen is not loading, check which version of Microsoft Internet Explorer you are using. IDIS Web may not launch properly on versions 8.0 or below. -
Page 15: Specifications
Part 3 - Appendix Specifications These product specifications may change without prior notice. Camera Image Sensor 1/2" CMOS Max. Resolution 1920 x 1080 Scanning Mode Progressive Scan Lens type HV1250P.IR-B1-S Focal Length f=12 - 50mm Aperture F1.5 - 1.9 Angular Field of View Wide : 33°(H), 18°(V), 38°(D) Tele : 9°(H), 5°(V), 10°(D) Electronic... - Page 16 Part 3 - Appendix * microSD Logo is a trademark of SD-3C, LLC. Audio In/Out DC-T6223HRL, Line-in 1ea / Line-out 1ea DC-T6224HRXL models only Alarm In 2 TTL, NC/NO Programmable, 4.3V(NC) or 0.3V(NO) threshold, 5V DC Alarm Out 1 TTL open collector, Max. load: 30mA, Max. voltage: 5VDC General Operating Temperature -40°C ~ +60°C (-40°F ~ +140°F)
- Page 18 IDIS Co., Ltd. For more information, please visit at www.idisglobal.com...
Need help?
Do you have a question about the DC-T6223HRL-A and is the answer not in the manual?
Questions and answers