Installation
Easy Installation Procedure
The following must be completed before powering on your new system:
3-1.
CPU Installation
3-2.
Jumper Settings
3-3.
System Memory
3-4.
Expansion Slots
3-5.
Device Connectors
3-1 CPU Installation
<Figure 1>
Step 1
Place the back plate into the two holes
around the CPU area behind the mainboard.
<Figure 3>
Step 3
Screw in the two pan head screws.
Page 3-2
<Figure 2>
Step 2
Place the retention mechanism on the
mainboard as shown.
<Figure 4>
Step 4
Open the socket by raising the actuation
lever.