Display Indication - Pioneer DVH-345UB Owner's Manual

Operating this unit
Button names Operation
Press to turn the information display on or off when the video is displayed.
Depending on the selected source, pressing this button can switch the dis-
11 DISP
play indication.
Press and hold to turn dimmer on or off.
Functions are the same as BAND button on the head unit.
12 BAND/ESC
Press to switch between media file types.
(Only in DVD source)
Move the thumb pad
Use to select a menu on the DVD menu.
Click to display the disc title list, track title list, folder list or file list depend-
13
ing on the source.
Click the thumb pad
(Only in DVD source)
Click ENTER to select a menu on the DVD menu.
(Only in DVD source)
MENU
Press to display the DVD menu during DVD playback.
14
(Only in DVD source)
TOP MENU
Press to return to the top menu during DVD playback.

Display indication

1
3 5 7 8
2 4 6
Indicator State
! Tuner: band and frequency
! RDS: program service
Main dis-
name, PTY information and
1
play sec-
other literal information
tion
! Built-in DVD player and
USB: elapsed playback
time and literal information
The list function is being oper-
2
(list)
ated.
3 LOC Local seek tuning is on.
4 (TA) TA function is on.
5
(TP) A TP station is tuned in.
(re-
6
Track or folder repeat is on.
peat)
Operating this unit
Indicator State
(ran-
7 Random play is on.
dom)
The sound retriever function is
8
(sound re-
on.
triever)
Set up menu
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
Important
New settings will not take effect until you finish
making changes on the setup menu.
1 After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2 Turn M.C. to switch to YES.
# If you do not operate for 30 seconds, the set up
menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO.
If you select NO, you cannot set up in the set up
menu.
3 Press M.C. to select.
4 Perform the following procedures to set
the menu.
To proceed to the next menu option, you need to
confirm your selection.
CLOCK SET (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
FM STEP (FM tuning step)
The FM tuning step employed by seek tuning can
be switched between 100 kHz, the preset step,
and 50 kHz.
! The tuning step remains at 50 kHz during man-
ual tuning.
1 Turn M.C. to select the FM tuning step.
50 (50 kHz)—100 (100 kHz)
2 Press M.C. to confirm the selection.
AM STEP (AM tuning step)
The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When using the
tuner in North, Central or South America, reset
the tuning step from 9 kHz (531 kHz to 1 602 kHz al-
lowable) to 10 kHz (530 kHz to 1 640 kHz allowable).
1 Turn M.C. to select the AM tuning step.
9 (9 kHz)—10 (10 kHz)
2 Press M.C. to confirm the selection.
DEMO (demo display setting)
1 Turn M.C. to set the demo display to on or off.
2 Press M.C. to confirm the selection.
QUIT appears.
5 To finish your settings, turn M.C. to select
YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO.
6 Press M.C. to select.
Section
02
5
En