Operating This Unit; Display Indication; Setup Menu - Pioneer MVH-350BT Owner's Manual

Operating this unit

Head unit
1 2 3 4 5
6 7 8 9 a b c
Part Part
BAND/ (iPod
1 7
SRC/OFF
control)
(back)/
MULTI-CONTROL
2 8 DIMMER
(M.C.)
(dimmer)
3 (list) 9
c/d
4 DISP a 1/ to 6/
AUX input jack
5 b
USB port (3.5 mm stereo
jack)
MVH-350BT
(phone)
6 c
Detach button
MVH-150UI
iPod
CAUTION
! Use an optional Pioneer USB cable (CD-
U50E) to connect the USB storage device as
any device connected directly to the unit will
protrude out from the unit, which could be
dangerous.
! Do not use unauthorized products.

Display indication

2 5 7 9
1 3 4 6 8
a
b d
c
Indicator State
The list function is being oper-
1
(list)
ated.
(iPod This unit's iPod function is op-
2
control) erated from your iPod.
Sub infor-
3 mation sec- Sub information is displayed.
tion
TA (traffic
4
announce- TA function is on.
ments)
TP (traffic
program
5
A TP station is tuned in.
identifica-
tion)
The sound retriever function
6
(sound re-
is on.
triever)
7 LOC Local seek tuning is on.
8
(repeat) Track or folder repeat is on.
Random play is on.
(ran-
The iPod source is selected
9
dom/shuf-
and the shuffle or shuffle all
fle)
function is on.
Only for MVH-350BT
(auto an-
a
Shows when the automatic
swer)
answering function is on.
Operating this unit
Indicator State
! Tuner: band and fre-
quency
! RDS: program service
Main infor-
name, PTY information
b mation sec-
and other literal informa-
tion
tion
! USB storage device and
iPod: elapsed playback
time and text information
Only for MVH-350BT
Connected to a Bluetooth de-
c (Bluetooth
vice.
indicator)
The line is on hold.
Appears when a lower tier of
d
folder or menu exists.
Set up menu
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
1 After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2 Turn M.C. to switch to YES.
# If you do not operate for 30 seconds, the set up
menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO. Press to select.
If you select NO, you cannot set up in the set up
menu.
3 Press M.C. to select.
4 Perform the following procedures to set
the menu.
To proceed to the next menu option, you need to
confirm your selection.
LANGUAGE (multi-language)
This unit can display the text information from a
compressed audio file even for information em-
bedded in English or Russian.
! If the embedded language and the selected
language setting are not the same, text infor-
mation may not display properly.
! Some characters may not be displayed prop-
erly.
1 Turn M.C. to select the desired setting.
ENG (English)—РУС (Russian)
2 Press M.C. to confirm the selection.
CLOCK SET (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
FM STEP (FM tuning step)
Normally, the FM tuning step employed by seek
tuning is 50 kHz. When AF or TA is on, the tuning
step automatically changes to 100 kHz. It may be
preferable to set the tuning step to 50 kHz when
AF is on.
! The tuning step remains at 50 kHz during man-
ual tuning.
1 Turn M.C. to select the FM tuning step.
50 (50 kHz)—100 (100 kHz)
2 Press M.C. to confirm the selection.
QUIT appears.
5 To finish your settings, turn M.C. to select
YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO. Press to select.
Section
02
3
En