Power Cable Connection - Pioneer DVH-345UB Owner's Manual

Section
Connections
03

Power cable connection

Wired remote input
Hard-wired remote control adapter can be
connected (sold separately).
Black (chassis ground)
Connect to a clean, paint-free metal location.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
20
En
(Only for Southeast Asian models)
RCA input
Input the sound from auxiliary devices.
This product
Antenna jack
Fuse (10 A)
Note:
· Change the initial setting of this unit (refer to
Initial settings). The subwoofer output of this unit
is monaural.
Connections
Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
White

Front speaker

Left
White/black
Green

Rear speaker

Green/black
When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of
this unit. Do not connect anything to Green and Green/black leads.
Green
Not used.
Green/black
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Gray

Front speaker

Right
Gray/black
Violet

Rear speaker

Violet/black

Violet
Subwoofer (4 Ω)
× 2

Violet/black