Display Indication; Set Up Menu - Pioneer DVH-340UB Operation Manual

Section
02 Operating this unit

Display indication

3
2
Indicator
Main dis-
1
play sec-
tion
2
(list)
3
LOC
4
(TA)
5
(TP)
6
(repeat)
(ran-
7
dom)
8
(sound re-
triever)

Set up menu

When you turn the ignition switch to ON after
installation, set up menu appears on the dis-
play.
You can set up the menu options below.
Important
New settings will not take effect until you finish
making changes on the setup menu.
8
En
1
5 7 8
4 6
State
! Tuner: band and frequency
! RDS: program service name,
PTY information and other lit-
eral information
! Built-in DVD player and USB:
elapsed playback time and lit-
eral information
The list function is being oper-
ated.
Local seek tuning is on.
TA function is on.
A TP station is tuned in.
Track or folder repeat is on.
Random play is on.
The sound retriever function is
on.
Autogood products «130»
1 After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2 Turn M.C. to switch to YES.
# If you do not operate for 30 seconds, the set
up menu will not be displayed.
# If you prefer not to set up at this time, turn
M.C. to switch to NO.
If you select NO, you cannot set up in the set up
menu.
3 Press M.C. to select.
4 Perform the following procedures to
set the menu.
To proceed to the next menu option, you need
to confirm your selection.
FM STEP (FM tuning step)
Normally, the FM tuning step employed by seek tun-
ing is 50 kHz. When AF or TA is on, the tuning step
automatically changes to 100 kHz. It may be prefer-
able to set the tuning step to 50 kHz when AF is on.
! The tuning step remains at 50 kHz during manual
tuning.
1 Turn M.C. to select the FM tuning step.
50 (50 kHz)—100 (100 kHz)
2 Press M.C. to confirm the selection.
DEMO (demo display setting)
1 Turn M.C. to set the demo display to on or off.
2 Press M.C. to confirm the selection.
TITLE (multi-language)
This unit can display the text information of a com-
pressed audio file even if they are embedded in a
Western European or Russian language.
! If the embedded language and the selected lan-
guage setting are not the same, text information
may not display properly.
! Some characters may not be displayed properly.
1 Turn M.C. to select the desired setting.
EUR (European)—RUS (Russian)
2 Press M.C. to confirm the selection.
QUIT appears.