Replace Motor Control Module (Mcm); Replace Temperature Control Module; (Tcm) - Graco Reactor 2 E-30 Repair Parts

Repair

Replace Motor Control Module (MCM)

1. Perform Shutdown, page
2. Disconnect connectors from MCM (63).
Disconnect two power cables. See
Electrical Schematics, page
3. Remove nuts (91) and MCM (63).
4. Set rotary switch. 2= E–30 and 3= E-XP2.
5. Replace MCM in enclosure.
6. Connect cables to MCM. See
Electrical Schematics, page
Figure 22 Replace MCM
68
43.
89.
89.

Replace Temperature Control Module

(TCM)

1. Perform Shutdown, page
2. Open electrical enclosure door (61).
3. Disconnect all connectors from the TCM (403).
4. Remove four nuts (411) and TCM (403).
5. Install new TCM module (403). Reassemble
parts in reverse order.
Figure 23 Replace TCM
43.
333024A