Page 1
INSTRUCTIONS FOR USE R E F . 2 7 6 1 S E L F - W I N D I N G M E C H A N I C A L W A T C H E S W I T H G M T F U N C T I O N...
Page 3
Your RAYMOND WEIL watch was hand- assembled by our master watchmakers according to the most rigorous quality standards of the Swiss watch industry.
Page 4
FREELANCER GMT DESCRIPTION OF THE DIAL The freelancer GMT is marked with a 24 hour scale. This enables a second time zone display which can be read from the 24 hour hand or by rotating the flange. Hours hand 24 hour hand GMT function Minutes hand 24 hour scale...
CHANGING THE DATE AND SETTING THE TIME Your RAYMOND WEIL freelancer watch is fitted with a screw-down crown. Before winding or adjusting the watch, it is therefore necessary to unscrew the crown by turning it anti-clockwise (position I > position II). The crown will then be released by a spring. After adjusting settings, press the crown and gently turn it clockwise, and then screw it carefully down to maintain your watch’s water-resistance.
FREELANCER GMT SETTING THE SECOND TIME ZONE HAND To adjust the 24 hour hand (or the second time zone hand), pull the crown out to position III and turn it away from you, clockwise, until the GMT hand indicates the exact time at your destination or your home.
Page 7
FREELANCER GMT DISPLAYING AN ALTERNATIVE TIME ZONE An alternative time zone can be displayed by using the rotatable flange and the 24-hour hand (which usually displays the reference time). To display the alternative time zone, place the flange in the neutral position (moon at 12 o’clock). Then calculate the number of hours’ difference between the reference time and the time in the desired time zone.