Using The Ps2 Program; Using The Batch File - IBM ThinkPad 755CX Manual

DOS
OS/2
Note:
To use the PS2 program in OS/2,
you need to install the program
using the same procedure as when
installing for DOS. See page 181.
Note:
The screen might be different from
the actual one.
Note:
Refer to the manuals supplied with
the operating system for more
information on batch files.

Using the PS2 Program

WIN
To start the PS2 program, type PS2 or PS2 ? at the command
prompt; the press Enter. The following help screen appears:
You can select an item from the menu and follow the instructions on
the screen to set any of the features.

Using the Batch File

You also can specify features by entering appropriate commands, or
you can create a batch file and set your unique operational
environment with the commands.
The following sample batch file would provide an operational
environment suitable for traveling, and could result in a
longer-battery operation time.
Using the ThinkPad Features Program
[ ] [ ] [
[ ]
[
Chapter 3. Operating Your Computer
]
]
41