Attaching An External Numeric Keypad Or A Mouse - IBM ThinkPad 755CX Manual

Attaching an External Numeric Keypad or a Mouse

Warning:
When you connect a mouse other
than IBM PS/2 Miniature Mouse,
turn off the computer.
Note:
You can remove the keypad cover
and use it as a stand for the
keypad.
Attaching an External Numeric Keypad or a Mouse
An external numeric keypad or a mouse can be attached directly to
the connector on the right side of the computer. You can use both
the IBM PS/2 Mouse and TrackPoint III as a pointing device. The
PS/2 Mouse is plugged into the external input device connector of
the computer and functions normally when the TrackPoint III is not
actually moving the cursor.
If you want to use the external numeric keypad and mouse at the
same time, first connect the keypad cable to the computer; then
connect the mouse cable
keypad.
to the connector at the rear of the
Chapter 6. Installing and Removing Options
159