Installing For Windows - IBM ThinkPad 755CX Manual

Warning:
Before you install the Mwave
support software, close all open
applications.

Installing for Windows

WIN
To install the Mwave support software for Windows, do the
following:
1
Turn on the computer; then start Windows.
2
Select File from the Program Manager window; then
select Run... from the pull-down menu.
3
Insert the Mwave DSP Features Diskette 1 for Windows
into the diskette drive.
4
Type A:SETUP; then press Enter.
The following screen, which enables you to specify the
directory location of Mwave support software, appears:
c:\MWW
5
If this directory is acceptable, press Enter. Otherwise,
type the directory name; then press Enter.
6
Follow the instructions on the screen.
7
After the installation is complete, remove any diskette
from the diskette drive; then restart Windows to activate
the Mwave support software.
You have completed the installation of the Mwave Windows support
software.
Installing the Mwave Support Software
Mwave Installation
Please enter the desired location for the Mwave files.
OK Cancel
Chapter 7. Installing Software
195