Installing For Os/2 - IBM ThinkPad 755CX Manual

Note:
To restart the system:
1. Move the cursor to a blank part
of your OS/2 Desktop.
2. Press the right button of your
TrackPoint III or mouse.
3. Select Shut down.
Note:
Whenever you update the
CONFIG.SYS file, refer to "Software
Considerations for OS/2" on
page 234.

Installing for OS/2

OS/2
To install the PCMCIA device driver for OS/2, do the following:
1
Turn on the computer and start the operating system.
2
Insert the PCMCIA Features Diskette into the diskette
drive.
3
Open the OS/2 full screen command prompt; then type
A:PCMINST2 and press Enter.
4
Follow the instructions on the screen.
5
After the installation has been successfully completed,
close all applications, remove the PCMCIA Features
Diskette from the diskette drive, and restart the system.
You have completed the installation of the PCMCIA device driver for
OS/2.
Go to "Installing the ThinkPad Display Driver" on page 188.
Installing the PCMCIA Device Driver
Chapter 7. Installing Software
185