Creating The Hibernation File - IBM ThinkPad 755CX Manual

Creating the Hibernation File

Warning:
The hibernation file must not be
created in a compressed data
area of the hard disk or external
drive.
OS/2
To start the ThinkPad
Features Program:
Page 36.
PS2 command:
Page 41.
When installing the operating system, or if you have expanded the
computer memory, you must create a hibernation file on the hard
disk drive to use hibernation mode.
The size of the hibernation file will be greater than total memory.
For example, if base memory is 8MB and you have installed an
optional 4MB IC DRAM card, the hibernation file is 13MB: (8MB
plus 4MB) plus 1MB.
The following describes how to create a hibernation file for your
operating system.
For OS/2 or Windows:
WIN
1. Turn on the computer and start the ThinkPad Features program.
2. Select Power; then select More....
3. Click on the Enable Hibernation button in the Suspend Options
menu.
4. Make sure the hard disk drive in the computer is selected; then
click on the OK button to create the hibernation file.
The computer can now enter hibernation mode.
For DOS:
DOS
1. Turn on the computer.
2. Type PS2 HFILE C at the command prompt and press Enter.
C can be any drive letter up to Z.
The computer can now enter hibernation mode.
Using Power Management
Chapter 3. Operating Your Computer
59