Makita HR5001C Instruction Manual page 14

1. Connector
2. Black
3. White
ACCESSORIES
14
Connect the connector and reinstall the handle.
003250
CAUTION:
• Do not tighten the crank cap excessively. It is made of
1 2
resin and is subject to breakage.
• Be careful not to damage the terminals or lead wires
especially when wiping out the old grease or installing
3
the handle.
To maintain product SAFETY and RELIABILITY, repairs, any
other maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
CAUTION:
• These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding these
accessories, ask your local Makita service center.
• SDS-Max Carbide-tipped bits
• Bull point
• Cold chisel
• Scaling chisel
• Scraping chisel
• Clay spade
• Hammer grease
• Bit grease
• Side handle
• Side grip
• Depth gauge
• Blow-out bulb
• Safety goggles
• Plastic carrying case