Regulatory Information - iRobot Roomba i5+ Owner's Manual

Regulatory Information

FCC Supplier's Declaration of Conformity
iRobot Corporation
EN
Contains FCC ID: UFE-AXFY1 and contains IC: 6652A-AXFY1
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This device contains a licence-exempt transmitter/receiver that complies with In-
novation, Science and Economic Development (ISED) Canada's licence-exempt
RSS(s). Operation is subject to the following two conditions: 1) This device may not
cause interference, and 2) this device must accept any interference, including
interference that may cause undesired operation of the device.
• Changes or modifications not expressly approved by iRobot
Corporation could void the user's authority to operate the equipment.
• This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the in-
structions, may cause harmful interference to radio communications. However,
there is no guarantee that interference to radio communication will not occur
in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
10 For more information, visit global.irobot.com
• Connect the equipment into an outlet on a circuit different from that to
Roomba Model: RVD-Y1
• Consult the dealer or an experienced radio/TV technician
• Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than the necessary for
successful communication.
• FCC Radiation Exposure Statement: This product complies with FCC §2.1091(b)
for mobile device RF exposure limits, set forth for an uncontrolled environment
and is safe for the intended operation as described in this manual. Per FCC
requirements, maintain a distance of more than 8 inches (20cm) between any
person and the host device (Roomba robot).
• ISED Radiation Exposure Statement: This product complies with the Canadian
Standard RSS-102 for portable RF exposure limits, set forth for an uncontrolled
environment and is safe for the intended operation as described in this
manual. Per ISED requirements, maintain a distance of more than 8 inches (20
cm) between any person and the robot.
iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730 USA.
https://global.irobot.com
For battery recycling go to call2recycle.org;
or call 1-800-822-8837
which the receiver is connected.
for help.