Seecode 234934 Manual page 14

C> COMPRESSION
Press the button and select between low, medium and high compression levels. The default
setting is low.
D> INTENSITY
Press the button and select the desired massage intensity between low, medium and high. The
default setting is „Low".
E> HEAT SETTINGS
Press the button and select a setting:
Heat for sole and back of foot: Purple indicator light is on.
Heat for sole of foot only: Red indicator light is on.
Heat for the back of the foot only: Blue control lamp lights up.
Cleaning the appliance
- Foot cuffs
Please wash the foot cuffs regularly and only by hand!
Remove and fasten the foot cuffs using the two zips.
Wash the foot cuffs with a mild detergent and allow them to air dry only.
Make sure that the foot cuffs are completely dry before you attach them to the massager again
using the zips.
- Massager
Wipe the outside of the massager with a clean, damp cloth.
Do not use harsh chemicals, concentrated soaps or corrosive agents as cleaning agents, but
dampen the sponge with water only.
14