Operating Modes With Manual Switchover - Siemens RDS110.R User Manual

6.2.1 Operating modes with manual switchover

A6V11562455_en--_d
Operating mode overview
You can manually switch to the following operating modes on the thermostat or in
the mobile application.
Operating Description
mode
At home You can use this mode when you stay at home or inside the
room where the thermostat is located.
When the thermostat operates under this mode, you can toggle
to
schedule, or toggle to
specified setpoint permanently. See Thermostat display overview
[➙ 18] for more detailed information about how the thermostat
works when
AWAY This mode helps save energy. You can use this mode when you
are away from home or outside the room where the thermostat is
located.
The temperature setpoint maintained under this mode is the
same with that scheduled in "Unoccupied" mode using the mobile
application. Deactivation of this mode switches the thermostat to
the schedule you've set (if you haven't set one, the thermostat
works following a default schedule).
Puts thermostat and the controlled heating system into Heating
HEAT ( )
only operation.
OFF You can use this mode to save energy when the space is not
occupied for a long time, for example, when you are taking a long
vacation.
Depending on how you've set up the thermostat, this mode can
mean one of the following:
●
Your heating equipment turns off completely.
● Your thermostat only works to maintain the system's
protection setpoint so that your heating equipment is not
destroyed if the room air temperature is too low, or if the air is
too humidified or dry. For more information about the
protection setpoint, see Managing application settings [➙ 31].
Deactivation of this mode switches the thermostat to the
schedule you've set (if you haven't set one, the thermostat
follows a default schedule).
Switch between "At home" and "AWAY" modes
●
On the Home screen, tap
● to switch from "AWAY" to "At home".
Tap
●
If you want to do it from the mobile application, see Switching between "Away"
and "At home".
Switch between "HEAT" and "OFF" modes
●
On the Home screen, tap
"Operating mode" page.
●
If you want to do it from the mobile application, see Switching between heating
and OFF modes.
NOTE: To awake your thermostat from the "OFF" mode, tap the thermostat screen
or switch back to "Heat" in the mobile application.
Operating the thermostat on the device
to let the thermostat run automatically following a
to let the thermostat operate at a
or is toggled on.
to switch from "At home" to "AWAY".
, and then tap "OFF" or "HEAT ( )" on the
6
Operating modes
25 | 60